newflux
Journal Sound Engineering

Sound Engineering: A Checklist Before You Commit to an Audio Plan

Priya Nair

6 min read

Priya Nair walks through the questions worth settling before you sign off an audio chain, from room and source to monitoring, crew and cabling, so late autumn bookings run cleanly.

Sound Engineering: A Checklist Before You Commit to an Audio Plan

Before anyone talks about consoles or microphones, write down where the sound will happen and what it is for. A talk show in a treated studio, a band in a converted warehouse and a conference in a hotel ballroom all ask different things of an audio chain, even when the equipment list looks similar. I work mostly with cameras, but I sit in enough planning meetings to see how often the audio decision is made last and under the most pressure.

Note the size of the space, the surfaces that reflect sound, the audience capacity and whether the programme is recorded, broadcast, streamed or only amplified in the room. Each of those outcomes changes how many feeds you need and how clean they must be. A stream that goes to viewers at home is judged on headphones, while a room is judged by the people standing furthest from the speakers.

  • Room size, surfaces and expected audience numbers
  • Whether output is live in the room, recorded, streamed or broadcast
  • Any fixed installation already in the building

List every source before choosing equipment

An honest source list is the backbone of the plan. Count every microphone, instrument, playback device, presenter, guest and remote caller, and note which ones move around. Radio microphones need frequency planning and spare batteries, while a fixed lectern microphone needs very little. Missing two or three sources at this stage usually means a larger mixing desk or an extra stage box later, and both are far easier to specify early than to find a week before an event.

Ask who supplies each source. Visiting bands often arrive with their own requirements, and guest speakers may bring laptops with unpredictable audio outputs. Agree who owns the connection between their gear and yours, and write down the connector types so nobody is searching for an adaptor on the day.

  • Wired and wireless microphones, counted separately
  • Playback, laptops and remote callers
  • Who supplies and connects each visiting source

Decide how the mix will be monitored

Monitoring is where plans most often come up short. Performers need to hear themselves, the engineer needs a reliable reference, and in a broadcast setting the director and presenters may each need their own feed. These are separate signals with separate cabling and, sometimes, separate people looking after them. If the checklist only covers what the audience hears, it is half finished.

Think about how the engineer will judge the sound. Speakers placed in the room give a true picture of the space, whereas headphones isolate problems in the feed. For recorded programmes, ask who will listen back and on what, since a mix that works in a studio can fall apart on a phone speaker. Agree on this before the day, because changing monitoring in rehearsal costs time that is rarely spare.

  • Stage or presenter monitoring needs
  • Engineer reference listening, room and headphones
  • Talkback between crew and director

Check cabling, power and signal routing

The audio chain is only as dependable as its physical path. Walk the route from every source to the mixing position and note the distance, the crossing points and any place where cables will be walked over. Balanced lines carry well over long runs, yet poor connectors and shared power cause hum that no mixer setting fully removes. Ask for clean power where the audio equipment lives and keep it apart from lighting dimmers where you can.

Draw a simple signal flow on one page showing sources, the desk, outputs and recording or streaming feeds. If it takes more than one page, the setup is probably more complicated than the event needs. Having this drawing also means a stand-in engineer can take over without a long handover, which matters when a long event runs across several shifts.

  • Cable runs, crossings and protection
  • Separate clean power for audio gear where possible
  • One-page signal flow, shared with the whole crew

Agree crew, rehearsal time and fallback plans

Equipment does not mix itself, so decide who is running audio, who is assisting and who they report to. For a longer day, a single engineer without relief tends to make more errors in the final hours. Agree a sound check slot that is protected from other departments, and give visiting acts a time to arrive before doors open. A rushed check is the most common reason for feedback in the first song.

Then ask what happens when something fails. A spare radio microphone, a backup recording and a second route to the main speakers are inexpensive compared with a silent stage. You do not need a spare of everything, only of the items whose failure would stop the programme. Write the list down and tick it off during setup.

  • Named engineer and assistant for the full running time
  • Protected sound check slot
  • Spares for the items that would stop the programme

Questions to put to your provider

When you have worked through the points above, you are ready to compare proposals fairly. Ask each provider to describe the signal path in plain words, to name who will be on site and to say what is included and what is not. A good answer is specific about your venue rather than a general list of equipment. Be wary of any plan that cannot explain why a given item has been chosen for your event.

Ask how changes are handled once the plan is agreed, such as a late guest or an extra stage. Changes are normal, and a provider who has a clear method for them will save you stress in the final week. Finally, ask what documentation you will receive afterwards, since a short written record of the setup makes the next event easier to plan.

A sound plan is rarely decided by the equipment list alone. It comes from knowing the room, counting every source, planning monitoring, tracing the cables, staffing the day and preparing for a fault. Work through these points in order and you will be able to compare proposals on equal terms and brief your crew clearly. With the darker months bringing more indoor events, an hour spent on this checklist now is cheaper than any fix on the night.