newflux
What we do

Studio, camera, lighting and sound services

Five areas of audiovisual production work, from the first studio drawing to the run sheet on the day of a live event, explained as they are carried out.

Studio, camera, lighting and sound services
Services

Five areas of production work

Each service can be commissioned on its own or combined with others on the same project. Studios, outside broadcasts, concerts and festival stages all draw on the same disciplines, so the work fits together.

  1. Broadcast Studio Design

    We plan the layout, acoustic treatment and cabling of television and streaming studios of every size. Drawings show where cameras, desks, monitors and cable runs sit, and how crew move around them. The plan is written so a contractor can build from it.

  2. Camera Systems and Control

    We help choose cameras for studio and outside broadcast use and set them up for consistent output. Remote control is configured so one operator can match several cameras. Priya Nair leads this work and keeps looks aligned from rehearsal to transmission.

  3. Lighting Design

    Lighting plots are drawn for studios, concerts and festival stages with the look, rigging safety and power budget considered together. Each plot lists fixtures, positions and loads. Tom Pickering designs these plans and checks them against the venue's rigging limits.

  4. Sound Engineering

    We plan the whole audio chain, from microphones and stage boxes to the mixing desk and monitoring. For live events and recorded programmes we set out channel lists, monitor mixes and signal paths. Hannah Doyle leads the sound work and the written guidance behind it.

  5. Live Event Workflows

    For festivals, parties and televised events we write run sheets, map signal routing and plan crew positions. The aim is that everyone knows who does what, and when. The workflow document covers rehearsal, changeovers and the contingency plan for common faults.

How it works

From first enquiry to a plan you can build from

Every project starts with a conversation about what you need to put on air or on stage. We then work through a short sequence of steps, each ending in something you can read, question and approve. Nothing moves forward until you have seen the previous document.

  1. Enquiry and first call

    You send an enquiry through the contact page describing the venue, the programme or event and any equipment already owned. We read it, then call to ask what the brief leaves open. Most of the first call is listening to how the space is used.

  2. Site visit or document review

    Where the space exists, we visit to measure, photograph and note power, access and acoustics. For spaces still on paper, we work from plans and drawings. Either way we look for constraints early, such as ceiling heights, load limits and cable routes.

  3. Written quotation

    We set out what we will deliver, which team members are involved and how the price is built from the work. The quotation states what is included and what would change the price. You are free to question any line before agreeing.

  4. Design and drafts

    The agreed work is drawn up as plans, plots, channel lists or run sheets, depending on the service. Drafts are shared so your technicians and contractors can comment while changes are still cheap to make. We revise until the documents are workable.

  5. Handover and support

    The final documents are issued in formats your crew and contractors can use. We walk through them with the people who will build or operate the system. Questions arising during the build can be put to the team that wrote the plan.

Preparation

What to prepare before you get in touch

A good first conversation needs only a few facts. The more you can tell us about the space, the people and the budget, the sooner we can say what is realistic. None of it needs to be perfect at this stage.

About the space

Tell us where the work will happen and what you know about it. Floor plans, photographs and rough dimensions are all useful, even if they are old. Mention the ceiling height, the number of power outlets and any restrictions on rigging or drilling. For temporary sites such as fields or marquees, describe the ground and the access for vehicles. If the space is still being designed, send whatever drawings exist and we will work from those.

About the programme

Describe what will be made or shown. A studio that records interviews has different needs from one that streams live to an audience. Tell us how many cameras, presenters and guests you expect, and whether the output is recorded, broadcast or both. For events, give the running order as far as it is known, the number of stages and the hours of operation. Rough ideas are enough to begin.

About budget and people

Give us an honest sense of what you can spend, even as a range. It lets us propose a design that fits instead of one you cannot build. Tell us who will operate the system day to day, and how experienced they are, because a plan for a volunteer crew differs from one for full-time engineers. Mention any equipment you already own and want to keep using.

FAQ

Questions we hear often

These answers cover how enquiries, quotations and payment work in practice. If your question is not here, the contact form reaches the team directly.

Can I commission just one service rather than several?
Yes. Each of the five services stands on its own, and many clients begin with a single piece of work such as a lighting plot or a camera setup. If the project later needs more, we can add it by agreement. Each addition is quoted in writing first.
Do you work with small studios and community venues?
We do. Studio design, lighting and sound plans are scaled to the room and the budget, whether that is a regional television set or a small streaming space. We say plainly when a requirement is out of proportion to the venue.
Do you supply or sell equipment?
Our work is consultancy and design: we choose, specify and configure equipment but do not sell it. That keeps our advice independent of what a supplier has in stock. We can write a specification for you to take to any supplier you choose.
Will you visit our site in person?
Where a visit helps, we arrange one. Measurements, photographs and a look at power and access often save time later. For projects still on paper, we can work from drawings and a video call instead, and say what that approach may miss.
How is the price worked out?
The price follows the scope of work in the written quotation, and the quotation explains what is included and what would change it. The prices page sets out the costs of each service. We do not charge for the first conversation about your enquiry.
How do ordering and payment work?
You send an enquiry through the contact page, we reply with a written quotation or confirmation, and once you agree we issue an invoice. Payment is by bank transfer. Nothing is bought or paid for through the website itself.
What happens if we need to cancel or change the work?
Changes are discussed and, where they alter the scope, confirmed in writing with any change to the price. Cancellations and refunds follow the payment and refund policy, which you can read before agreeing to anything.
Can you help on the day of a live event?
Live event workflows cover the planning, the run sheet and the signal routing, and your own crew carries them out. If you would like us involved during rehearsal or on the day, tell us in the enquiry and we will discuss what is practical.